You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

As I stated before you should be able to measure a signal from the antenna terminal to the base of TR17 and TR17 does not need to be there to see a signal at the point on the board where TR17's base would be. Actually, if you have good eyes and can unsolder the base and just make sure it's not making a connection that's fine, but either way you should still be able to track a signal up to that point "BASE" and see the signal with no power applied to the radio.

[QUOTE="OldTech03, post: 662224, member: 51291"] [B][SIZE=5]As I stated before you should be able to measure a signal from the antenna terminal to the base of TR17 and TR17 does not need to be there to see a signal at the point on the board where TR17's base would be. Actually, if you have good eyes and can unsolder the base and just make sure it's not making a connection that's fine, but either way you should still be able to track a signal up to that point "BASE" and see the signal with no power applied to the radio. [/SIZE][/B] [/QUOTE]

Top Bottom