You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Well, it's good that you RF gain voltage adjustment.

Not good about L6 but it's fairly abundant as it is 27 meg and should be easy to get from any old chassis in the Connex, Galaxy or Ranger line.

The final section having voltage on the driver and one final I would unsolder the Collector of the final that is not showing voltage and check for voltage again. If there is still no voltage at the point where the collector was soldered to the board you would then suspect an open circuit or a bad solder connection where the collector voltage fed from the collector of the other.

Don't get into big of a hurry to give up it's far from a lost cause. I will check my parts for a 27meg transformer but you will have to have some patience as the customer will also have to show some as well. You could maybe find another parts unit with a good coil in it

I may have found a source for the coil there is number and URL below
the coil number is ECIFT12004
http://www.rrcom.com/radioparts/Parts Pictures/ECIFT12004.html

<blockquote data-quote="OldTech03" data-source="post: 662536" data-attributes="member: 51291">Well, it&#039;s good that you RF gain voltage adjustment.Not good about L6 but it&#039;s fairly abundant as it is 27 meg and should be easy to get from any old chassis in the Connex, Galaxy or Ranger line. The final section having voltage on the driver and one final I would unsolder the Collector of the final that is not showing voltage and check for voltage again. If there is still no voltage at the point where the collector was soldered to the board you would then suspect an open circuit or a bad solder connection where the collector voltage fed from the collector of the other.Don&#039;t get into big of a hurry to give up it&#039;s far from a lost cause. I will check my parts for a 27meg transformer but you will have to have some patience as the customer will also have to show some as well.&nbsp; You could maybe find another parts unit with a good coil in it I may have found a source for the coil there is number and URL belowthe coil number is ECIFT12004<a href="http://www.rrcom.com/radioparts/Parts%20Pictures/ECIFT12004.html" target="_blank">http://www.rrcom.com/radioparts/Parts Pictures/ECIFT12004.html</a></blockquote>

[QUOTE="OldTech03, post: 662536, member: 51291"] [B]Well, it's good that you RF gain voltage adjustment. Not good about L6 but it's fairly abundant as it is 27 meg and should be easy to get from any old chassis in the Connex, Galaxy or Ranger line. The final section having voltage on the driver and one final I would unsolder the Collector of the final that is not showing voltage and check for voltage again. If there is still no voltage at the point where the collector was soldered to the board you would then suspect an open circuit or a bad solder connection where the collector voltage fed from the collector of the other. Don't get into big of a hurry to give up it's far from a lost cause. I will check my parts for a 27meg transformer but you will have to have some patience as the customer will also have to show some as well. You could maybe find another parts unit with a good coil in it [COLOR=#ff4d4d]I may have found a source for the coil there is number and URL below the coil number is [/COLOR][COLOR=#0000ff]ECIFT12004[/COLOR] [COLOR=#4d4dff][URL='http://www.rrcom.com/radioparts/Parts%20Pictures/ECIFT12004.html']http://www.rrcom.com/radioparts/Parts Pictures/ECIFT12004.html[/URL][/COLOR][/B] [/QUOTE]

Top Bottom