You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

As for the "recieving on a lower channel, transmitting on the right channel" issue I went through all the pots and switches with CRC QD Cleaner, twice. I even had the front bezel and knobs off for better cleaning access, when I was replacing the meter. All the switches and knobs seem to work. No 10khz switch like on my General Lee. This problem has existed since I received the radio, so nothing I've done so far caused or affected it.

Attached is what the front panel of this old 3300 looks like, disregard the 3300HP-ZX, it's just a photo I found on google that matches what my 3300 looks like.

I can get a photo of the component-side of the echo board later today, and maybe a close up of the backside of the front panel to see all the pots and their wiring.

[QUOTE="JDE, post: 785585, member: 62345"] As for the "recieving on a lower channel, transmitting on the right channel" issue I went through all the pots and switches with CRC QD Cleaner, twice. I even had the front bezel and knobs off for better cleaning access, when I was replacing the meter. All the switches and knobs seem to work. No 10khz switch like on my General Lee. This problem has existed since I received the radio, so nothing I've done so far caused or affected it. Attached is what the front panel of this old 3300 looks like, disregard the 3300HP-ZX, it's just a photo I found on google that matches what my 3300 looks like. I can get a photo of the component-side of the echo board later today, and maybe a close up of the backside of the front panel to see all the pots and their wiring. [/QUOTE]

Top Bottom