You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Update 11/3/2009

Finally today,

The weather was nice enough to get up on the roof. I finally installed the GPK kit for my Imax 2000. I have not had a chance to see any differences yet. I will be installing the Balun & the better coax soon. I just needed to get the GPK kit out of the way. I still need to turn down the Delrin rod. I used the Vernier caliber & I need to take .125 off 12" of the 2' Delrin rod. But I do not have access to a lathe. I may try the Table saw like Loosecannon suggested or a belt sander. Will keep everyone posted on my progress. Sorry it's been so long since my last post as I have also been having computer problems at home and finishing up a work bench I've been building for the garage.

J.

[QUOTE="cominatyalive, post: 161104, member: 10541"] [b]Update 11/3/2009[/b] Finally today, The weather was nice enough to get up on the roof. I finally installed the GPK kit for my Imax 2000. I have not had a chance to see any differences yet. I will be installing the Balun & the better coax soon. I just needed to get the GPK kit out of the way. I still need to turn down the Delrin rod. I used the Vernier caliber & I need to take .125 off 12" of the 2' Delrin rod. But I do not have access to a lathe. I may try the Table saw like Loosecannon suggested or a belt sander. Will keep everyone posted on my progress. Sorry it's been so long since my last post as I have also been having computer problems at home and finishing up a work bench I've been building for the garage. J. [/QUOTE]

Top Bottom