You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hiya Gumby,

It's not a simple as using wall wart for what I'm doing. That would be fine in an ordinary application but I'm using a precision lower voltage to modify the speed of the tweety bird repeat. In this case it's 7.5 volts. The wall wart won't do that. The mic amp is working just fine off of this voltage as well. Also using the power supply to run the fans and I can always come up with a different use for the bargain adjustable supply if I decide to take it down from this use.

But thanks! good tip!

[QUOTE="Wire Weasel, post: 185002, member: 8415"] Hiya Gumby, It's not a simple as using wall wart for what I'm doing. That would be fine in an ordinary application but I'm using a precision lower voltage to modify the speed of the tweety bird repeat. In this case it's 7.5 volts. The wall wart won't do that. The mic amp is working just fine off of this voltage as well. Also using the power supply to run the fans and I can always come up with a different use for the bargain adjustable supply if I decide to take it down from this use. But thanks! good tip! [/QUOTE]

Top Bottom