You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Why not just use a dropping resistor on the "hot" lead for the toy? That is the way we did it years ago to slow them down. Also if it is wired with the hot wire through the button add a 1uf cap (experiment with value) from the toy side to ground. When you let off the button it will give you a squirt of sorts at the end of the birds. This will save all the extra wires going to the mike.

[QUOTE="Bionic Chicken, post: 185123, member: 7253"] Why not just use a dropping resistor on the "hot" lead for the toy? That is the way we did it years ago to slow them down. Also if it is wired with the hot wire through the button add a 1uf cap (experiment with value) from the toy side to ground. When you let off the button it will give you a squirt of sorts at the end of the birds. This will save all the extra wires going to the mike. [/QUOTE]

Top Bottom