You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

My brothers 10 tube Phantom popped fuse and as I was checking amp out I have run into something that seems unusual it has voltage running on top of the tubes all of the time like a Heathkit it has the three stages by switching switches voltage is on low 400 all tubes, medium 400 on 4 and 900 on 6, high 900 on 10 this is quite different from our other Phantoms which do not show voltage on top till keyed up. Found that fuse problem was caused by a bad tube and plate choke replaced tube and choke and amp works great if I had not checked amp out we would have never known that this amp was different than other Phantoms my brother has used amp off and on since last summer. Is there any specific reason for this change? Seems to me that running voltages on top of tubes all the time would cause tubes to not last as long but being new to this I am asking for advice or input please. Thank You

<blockquote data-quote="Jimbo165" data-source="post: 429494" data-attributes="member: 25981"><p>My brothers 10 tube Phantom popped fuse and as I was checking amp out I&nbsp; have run into something that seems unusual&nbsp; it has voltage running on top of the tubes all of the time like a Heathkit it has the three stages by switching switches voltage is on low 400 all tubes, medium 400 on 4 and 900 on 6, high 900 on 10 this is quite different from our other Phantoms which do not show voltage on top till keyed up. Found that fuse problem was caused by a bad tube and plate choke&nbsp; replaced tube and choke and amp works great&nbsp; if I had not checked amp out we would have never known that this amp was different than other Phantoms my brother has used amp off and on since last summer. Is there any specific reason for this change? Seems to me that running voltages on top of tubes all the time would cause tubes to not last as long but being new to this I am asking for advice or input please.&nbsp; Thank You</p></blockquote><p></p>

[QUOTE="Jimbo165, post: 429494, member: 25981"] My brothers 10 tube Phantom popped fuse and as I was checking amp out I have run into something that seems unusual it has voltage running on top of the tubes all of the time like a Heathkit it has the three stages by switching switches voltage is on low 400 all tubes, medium 400 on 4 and 900 on 6, high 900 on 10 this is quite different from our other Phantoms which do not show voltage on top till keyed up. Found that fuse problem was caused by a bad tube and plate choke replaced tube and choke and amp works great if I had not checked amp out we would have never known that this amp was different than other Phantoms my brother has used amp off and on since last summer. Is there any specific reason for this change? Seems to me that running voltages on top of tubes all the time would cause tubes to not last as long but being new to this I am asking for advice or input please. Thank You [/QUOTE]

Top Bottom