You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hey Funky, Yep it sure does. Works same as all the ones I have done. Same grounding situation....the ground from the Tweety goes to chassis ground. I usually attach under one of the screws that holds the mic cord down. They're out in the open and easy to get to.

There may be some problem associated with the chip that your Tweetys have. I think yours are the CA3086 chip but all the ones I have seen the numbers are scratched off and I have only heard that that is what they are. The tweet-on-key up has never been a problem with the CA3045's that I make.

[QUOTE="Wire Weasel, post: 208006, member: 8415"] Hey Funky, Yep it sure does. Works same as all the ones I have done. Same grounding situation....the ground from the Tweety goes to chassis ground. I usually attach under one of the screws that holds the mic cord down. They're out in the open and easy to get to. There may be some problem associated with the chip that your Tweetys have. I think yours are the CA3086 chip but all the ones I have seen the numbers are scratched off and I have only heard that that is what they are. The tweet-on-key up has never been a problem with the CA3045's that I make. [/QUOTE]

Top Bottom