You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

does anybody have a shot of the tube board, bottom side of a DAK9? (where the 2 HV caps that mount to the board are)
i replaced the HV caps on the radio and now when i flip it to TX i have a bad buzz and one of the cans heat up pretty fast, but i thought i hooked everything up as it was.
nothing burnt no sparks, i turned it off asap. but i did nothing but swap out the 3 47uf 450v caps.

[QUOTE="MonsterAudio, post: 311506, member: 18411"] does anybody have a shot of the tube board, bottom side of a DAK9? (where the 2 HV caps that mount to the board are) i replaced the HV caps on the radio and now when i flip it to TX i have a bad buzz and one of the cans heat up pretty fast, but i thought i hooked everything up as it was. nothing burnt no sparks, i turned it off asap. but i did nothing but swap out the 3 47uf 450v caps. [/QUOTE]

Top Bottom