You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ya' kinda went the wrong way...

[ATTACH=full]44959[/ATTACH]

You need the influence of the cap to hold down the lower end of the envelope "swing" ...

As it recharges, so does the swing "rise", you need to replace the R228 back to the 560 - play with R195 instead.

Not to go into a lot of details but the 1.5K resistor mod, that value is already there.

note how 1K is R194 to one side, as 1.5K is R195 - to the other...

The location of the 560 and the 1K affect how that diode flows power out of, and into - that cap - that is where the lower limits are set. You can only get so much power out of this design - then you'll have to settle for what you've got.

A better way is to mess with the 1.5K on R195 and that side of the circuit - you can try various methods to help here - including what is done at JP36 on a 29'. I'll leave it at that...

<blockquote data-quote="Handy Andy" data-source="post: 763855" data-attributes="member: 52309">Ya&#039; kinda went the wrong way...[ATTACH=full]44959[/ATTACH]You need the influence of the cap to hold down the lower end of the envelope &quot;swing&quot; ...As it recharges, so does the swing &quot;rise&quot;, you need to replace the R228 back to the 560 - play with R195 instead.Not to go into a lot of details but the 1.5K resistor mod, that value is already there.<ul>
<li data-xf-list-type="ul">note how 1K is R194 to one side, as 1.5K is R195 - to the other...</li>
</ul>The location of the 560 and the 1K affect how that diode flows power out of, and into - that cap - that is where the lower limits are set.&nbsp; You can only get so much power out of this design - then you&#039;ll have to settle for what you&#039;ve got. A better way is to mess with the 1.5K on R195 and that side of the circuit - you can try various methods to help here - including what is done at JP36 on a 29&#039;. I&#039;ll leave it at that...</blockquote>

[QUOTE="Handy Andy, post: 763855, member: 52309"] Ya' kinda went the wrong way... [CENTER][ATTACH=full]44959[/ATTACH][/CENTER] You need the influence of the cap to hold down the lower end of the envelope "swing" ... As it recharges, so does the swing "rise", you need to replace the R228 back to the 560 - play with R195 instead. Not to go into a lot of details but the 1.5K resistor mod, that value is already there. [LIST] [*]note how 1K is R194 to one side, as 1.5K is R195 - to the other... [/LIST] The location of the 560 and the 1K affect how that diode flows power out of, and into - that cap - that is where the lower limits are set. You can only get so much power out of this design - then you'll have to settle for what you've got. A better way is to mess with the 1.5K on R195 and that side of the circuit - you can try various methods to help here - including what is done at JP36 on a 29'. I'll leave it at that... [/QUOTE]

Top Bottom