You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
131.5' antenna cut at 70/30.
4:1 ruthroth balun at feed point
100uf 3k volt disk cap fed through between balun and long leg
1:1 Guanella coax choke below balun
106' rg8x coax
40' kinda sag flat top.
I bet the 100 uF is 100 pF.
My Original Fritzel FD-4 1500 watt AMA balun 1:6.7 also works on 6 meter as well.
No C in the long leg though, not needed that SWR is quite good over the bands.
Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.