You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I have a 10' male stereo 1/8" to male stereo 1/8" patch cord. Goes from a 1/4" to 1/8" reducer plug from RS, stuck in the Headphones hole in the front of the RCI Base station to get the audio to my computers sound card. Stick the adapter into the plug, then pull it out a quarter inch and you get Mono to the PC and you can still hear the radio speaker. Works VERY well.

There is no Signalink for RCI or any other "common" radio, so forget the cord back to the radio. Just drag one of your speakers up front and when you TX, hold the Mic in front of the speaker and key up. Adjust the power out of course, but there it is....

Yankee inginuity.

[QUOTE="Yankee, post: 446528, member: 31726"] I have a 10' male stereo 1/8" to male stereo 1/8" patch cord. Goes from a 1/4" to 1/8" reducer plug from RS, stuck in the Headphones hole in the front of the RCI Base station to get the audio to my computers sound card. Stick the adapter into the plug, then pull it out a quarter inch and you get Mono to the PC and you can still hear the radio speaker. Works VERY well. There is no Signalink for RCI or any other "common" radio, so forget the cord back to the radio. Just drag one of your speakers up front and when you TX, hold the Mic in front of the speaker and key up. Adjust the power out of course, but there it is.... Yankee inginuity. [/QUOTE]

Top Bottom