You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Do you have a height restriction for the antenna? Ten meters is a high enough frequency you could just take a piece of good-quality stainless rod and cut it to length and put a screw-in stud on one end. Same idea: take a 102" CB whip and cut it down a bit. Use an antenna analyzer with the antenna mounted where it will be used. Cut in small increments until you get the results you want.

[QUOTE="Beetle, post: 110176, member: 1066"] Do you have a height restriction for the antenna? Ten meters is a high enough frequency you could just take a piece of good-quality stainless rod and cut it to length and put a screw-in stud on one end. Same idea: take a 102" CB whip and cut it down a bit. Use an antenna analyzer with the antenna mounted where it will be used. Cut in small increments until you get the results you want. [/QUOTE]

Top Bottom