You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I don't know about EZNEC specifically, but I can tell you that in NEC2, which is what EZNEC either uses or is based on, if I model two equal length parallel wires close together, with a source across the bottom ends I get gain and a pattern. It seems NEC2 radiates when you have two parallel wires with equal currents and opposite phase, and radiates fairly well. The pattern looks like two separate lengths of wire fed 180 degrees out of phase.

The DB

[QUOTE="The DB, post: 495635, member: 21346"] I don't know about EZNEC specifically, but I can tell you that in NEC2, which is what EZNEC either uses or is based on, if I model two equal length parallel wires close together, with a source across the bottom ends I get gain and a pattern. It seems NEC2 radiates when you have two parallel wires with equal currents and opposite phase, and radiates fairly well. The pattern looks like two separate lengths of wire fed 180 degrees out of phase. [URL='http://hittman.us'][COLOR=#000000]The DB[/COLOR][/URL] [/QUOTE]

Top Bottom