You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

You guys were right! Thanks!! I checked the wiring from the switch to the wire wrap pin for pin 10 and found +5 volts Ch 1 to Ch 28. Then it hit me... I didn't actually check pin 10 on the chip itself. Sure enough no +5! Pulled the bottom plate, examined the pcb and there were two cut tracks. One for pin 10 and also pin 9. Once jumped the frequencies are correct Ch 1 is back to 26.965. Hey thanks a million! John
ps also made a good skip contact into Texas just to make sure all is AOK

[QUOTE="doc john, post: 852316, member: 68776"] You guys were right! Thanks!! I checked the wiring from the switch to the wire wrap pin for pin 10 and found +5 volts Ch 1 to Ch 28. Then it hit me... I didn't actually check pin 10 on the chip itself. Sure enough no +5! Pulled the bottom plate, examined the pcb and there were two cut tracks. One for pin 10 and also pin 9. Once jumped the frequencies are correct Ch 1 is back to 26.965. Hey thanks a million! John ps also made a good skip contact into Texas just to make sure all is AOK [/QUOTE]

Top Bottom