You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Jumpers?

Station ground?

CMC on the coax?

If it works fine into the dummy load I would say the rig is fine.

Try just straight from the rig to the antenna, no jumpers tuners etc. etc.

Also power cords for the rig.

Had one rig drove me crazy until I shortened up the power cords, seemed it was acting as a receive antenna on 10 meters.

Maybe try an rf choke, ugly balun at the back of the rig.

[QUOTE="wavrider, post: 450833, member: 9893"] Jumpers? Station ground? CMC on the coax? If it works fine into the dummy load I would say the rig is fine. Try just straight from the rig to the antenna, no jumpers tuners etc. etc. Also power cords for the rig. Had one rig drove me crazy until I shortened up the power cords, seemed it was acting as a receive antenna on 10 meters. Maybe try an rf choke, ugly balun at the back of the rig. [/QUOTE]

Top Bottom