You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Bob, I know its been a long time, but I had a thought to model your idea here. I started, but had a thought that I did not have the actual measurements for the bent radials you used. Here is what I've done so far. Maybe you could tell me the length of the two piece radials you used.

Is this MM200's antenna you talked about before? If it is, I would like to know if the models might show to even be close to what you observed back then. I don't expect you'll be able to tell much as far as the actual gain and angles that will result, but I was mostly considering that there might be something show up regarding the TVI issue you mentioned.

These images basically are basically showing the overall look and the dimensions...that are noted in the details. The last two views are overhead views just to see if the antenna looks like MM200's.

[ATTACH]5575[/ATTACH]

<blockquote data-quote="Marconi" data-source="post: 315713" data-attributes="member: 903">Bob, I know its been a long time, but I had a thought to model your idea here. I started, but had a thought that I did not have the actual measurements for the bent radials you used. Here is what I&#039;ve done so far. Maybe you could tell me the length of the two piece radials you used. &nbsp;Is this MM200&#039;s antenna you talked about before? If it is, I would like to know if the models might show to even be close to what you observed back then. I don&#039;t expect you&#039;ll be able to tell much as far as the actual gain and angles that will result, but I was mostly considering that there might be something show up regarding the TVI issue you mentioned. &nbsp;These images basically are basically showing the overall look and the dimensions...that are noted in the details. The last two views are overhead views just to see if the antenna looks like MM200&#039;s.&nbsp;[ATTACH]5575[/ATTACH]</blockquote>

[QUOTE="Marconi, post: 315713, member: 903"] Bob, I know its been a long time, but I had a thought to model your idea here. I started, but had a thought that I did not have the actual measurements for the bent radials you used. Here is what I've done so far. Maybe you could tell me the length of the two piece radials you used. Is this MM200's antenna you talked about before? If it is, I would like to know if the models might show to even be close to what you observed back then. I don't expect you'll be able to tell much as far as the actual gain and angles that will result, but I was mostly considering that there might be something show up regarding the TVI issue you mentioned. These images basically are basically showing the overall look and the dimensions...that are noted in the details. The last two views are overhead views just to see if the antenna looks like MM200's. [ATTACH]5575.vB[/ATTACH] [/QUOTE]

Top Bottom