You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

WOW...........I am not sure where to even start here.

A 667 is a 1x4 LOW DRIVE amplifier with a single 2290 driver and four 2879's. There is no need to mess with the finals or do really anything to this amp, it is what it is and is just fine. Radio drive levels for this amp are as follows, 1-1.5 watt AM dead key input with a peak input of 12-20 watts MAX.

This means that IN NO WAY SHAPE OR FORM should a Galaxy 95T be used. Unless you want to blow the piss out of the amp.

I have re-read your post many times now and I have no clue what you are talking about when you refer to your 667 only doing 200 watts and you want to do something with 2030 mosfets? None of that makes any sense at all. Can you expand on that some please.

[QUOTE="9C1Driver, post: 437872, member: 7716"] WOW...........I am not sure where to even start here. A 667 is a 1x4 LOW DRIVE amplifier with a single 2290 driver and four 2879's. There is no need to mess with the finals or do really anything to this amp, it is what it is and is just fine. Radio drive levels for this amp are as follows, 1-1.5 watt AM dead key input with a peak input of 12-20 watts MAX. This means that IN NO WAY SHAPE OR FORM should a Galaxy 95T be used. Unless you want to blow the piss out of the amp. I have re-read your post many times now and I have no clue what you are talking about when you refer to your 667 only doing 200 watts and you want to do something with 2030 mosfets? None of that makes any sense at all. Can you expand on that some please. [/QUOTE]

Top Bottom