You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

sounds like oscillation.

i am wondering if someone cranked the bias pots on the driver and final.

try setting the bias on the driver and finals using these instructions: http://www.cbtricks.com/radios/galaxy/dx99v/dx99v_trans_adj.htm

when they say to remove the "metering jumper" they are referring to the little PC board sitting vertically in front of the driver and finals.

just a guess.
LC

[QUOTE="loosecannon, post: 606788, member: 1368"] sounds like oscillation. i am wondering if someone cranked the bias pots on the driver and final. try setting the bias on the driver and finals using these instructions: [URL]http://www.cbtricks.com/radios/galaxy/dx99v/dx99v_trans_adj.htm[/URL] when they say to remove the "metering jumper" they are referring to the little PC board sitting vertically in front of the driver and finals. just a guess. LC [/QUOTE]

Top Bottom