You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hi Andy, OK, so I figured out the correct settings for my meter and on the first test measuring TP9 to TP7 and adjusting VR12 the service manual calls for a 50ma setting which was no problem. For the testing between TP8 and TP7 and adjusting VR10 the service manual does call for 100ma but I could not adjust it above 47ma and output still was about 1/2 watt on deadkey when I went back to test on AM so something else is wrong? If you can tell me anything else I can try I am ready. Thanks, Adam

[QUOTE="Adamf, post: 767027, member: 46485"] Hi Andy, OK, so I figured out the correct settings for my meter and on the first test measuring TP9 to TP7 and adjusting VR12 the service manual calls for a 50ma setting which was no problem. For the testing between TP8 and TP7 and adjusting VR10 the service manual does call for 100ma but I could not adjust it above 47ma and output still was about 1/2 watt on deadkey when I went back to test on AM so something else is wrong? If you can tell me anything else I can try I am ready. Thanks, Adam [/QUOTE]

Top Bottom