• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Galaxy DX-86v or Galaxy 979F for base?

Got it back today. Dead on holding. I like having the extra counter to be sure. Set to 1/9 AM dk and AM swings up at the 4:1, and SSB is set at 35w PEP also when on high.

Now we just need skip conditions.

View attachment 34431

“Skip” is it’s favorite condition. And it’s a Galaxy . . truckers pause before replying on AM-19.

My 979 is going to get sent out for repair & align, etc, then go to a new home with a driver I respect (far more bills than me).

I like them both.

Something else “might” be better, but the 959 and these two are damned hard to beat for pleasurable day in & out mobile use.

Am sitting in west OKC tonight listening to Rattlesnake & Friends more than a dozen miles distant.

.
 
Last edited:
  • Like
Reactions: Shadetree Mechanic
Can you get Red carded for abusing a Galaxy?
giphy.gif
 
  • Like
Reactions: Slowmover
Have to say I think I am kinda lucky as long I let my Texas Ranger 696 FD1, "959 clone," warm up for 30 min it seems to hold pretty steady on SSB. I have been using it as my main base. That's what I was told when I bought it, been doing that ever since. I did run it as a mobile for a few years in a Ford Explorer. It has been my favorite CB for mobile use. I do recall sitting on the side of the road many times listening to skip.
 
The 86v is a great radio. All performance with no extra bs. Built like a tank too.

Did anyone figure out where to solder the wires internally to hook up the FC347 counter?
 
The 86V already has Roger Beep
Look right behind channel selector You will see a plug receptacle with nothing plugged into it and Capital R- Period - Capital- B Period (R.B.) connect a switch to these pins ..Key up the mic and BEEP!!
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • @ kopcicle:
    If you know you know. Anyone have Sam's current #? He hasn't been on since Oct 1st. Someone let him know I'm looking.
  • dxBot:
    535A has left the room.
  • @ AmericanEagle575:
    Just wanted to say Good Morning to all my Fellow WDX members out there!!!!!