You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

what few I did I put the 4 turn coil in them also.does make a difference on the output a little. Rick and Bennie did this one up in about 2008 and Rick says he has done over 300 of the mosfet conversions with a great success rate. I did notice that on a 959 or 949 if you open up the audio chain some will help them a lot. the cb versions are chocked off a lot to meet FCC guidelines. I just change the resisters and caps from the mic circuit to match the 2517 its only a couple caps and resisters. forget which ones but have them wrote down out in the garage .

[QUOTE="sonoma, post: 467088, member: 756"] what few I did I put the 4 turn coil in them also.does make a difference on the output a little. Rick and Bennie did this one up in about 2008 and Rick says he has done over 300 of the mosfet conversions with a great success rate. I did notice that on a 959 or 949 if you open up the audio chain some will help them a lot. the cb versions are chocked off a lot to meet FCC guidelines. I just change the resisters and caps from the mic circuit to match the 2517 its only a couple caps and resisters. forget which ones but have them wrote down out in the garage . [/QUOTE]

Top Bottom