You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

What voltage did you adjust the VCO to be? Should be about 1.5 to 2v on the lowest channel (Ch 1) in RX, VCO should be 16.270 MHz. Then go to the highest channel in TX, the VCO voltage should be less than 5v, even in the "upper channels".

[QUOTE="NZ8N, post: 853203, member: 51368"] What voltage did you adjust the VCO to be? Should be about 1.5 to 2v on the lowest channel (Ch 1) in RX, VCO should be 16.270 MHz. Then go to the highest channel in TX, the VCO voltage should be less than 5v, even in the "upper channels". [/QUOTE]

Top Bottom