You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hello Xracerx13,

Wow! You just taught me something that I have never come across. As I had mentioned, I have never had to replace these and so I never really paid any of attention to their actual values or how to verify them.

Sorry its been a while since I have checked in. There has been a lot going on in my neck of the woods that has kept me away from the radio world.

I would like to ask if their is anyone who has a clearer schematic that can clearly identify what leads of the caps that piggy back the finals are actually soldered to.

From what I can see, one pin goes to the Emitter and the other pin goes to the far left of the Base, but not the Base itself but on another connection on the board. In other words, only one pin of the cap gets connected to only one lead of the final, which is the Emitter. Is this correct with what I am seeing on the schematic?

Again a Big Thank You Xracerx13 for teaching me something that I did not know.

RF Krazy

<blockquote data-quote="RF Krazy" data-source="post: 847839" data-attributes="member: 66502">Hello Xracerx13,Wow!&nbsp; You just taught me something that I have never come across.&nbsp; As I had mentioned, I have never had to replace these and so I never really paid any of attention to their actual values or how to verify them.Sorry its been a while since I have checked in.&nbsp; There has been a lot going on in my neck of the woods that has kept me away from the radio world.I would like to ask if their is anyone who has a clearer schematic that can clearly identify what leads of the caps that piggy back the finals are actually soldered to.From what I can see, one pin goes to the Emitter and the other pin goes to the far left of the Base, but not the Base itself but on another connection on the board.&nbsp; In other words, only one pin of the cap gets connected to only one lead of the final, which is the Emitter.&nbsp; Is this correct with what I am seeing on the schematic?Again a Big Thank You Xracerx13 for teaching me something that I did not know.&nbsp; RF Krazy</blockquote>

[QUOTE="RF Krazy, post: 847839, member: 66502"] Hello Xracerx13, Wow! You just taught me something that I have never come across. As I had mentioned, I have never had to replace these and so I never really paid any of attention to their actual values or how to verify them. Sorry its been a while since I have checked in. There has been a lot going on in my neck of the woods that has kept me away from the radio world. I would like to ask if their is anyone who has a clearer schematic that can clearly identify what leads of the caps that piggy back the finals are actually soldered to. From what I can see, one pin goes to the Emitter and the other pin goes to the far left of the Base, but not the Base itself but on another connection on the board. In other words, only one pin of the cap gets connected to only one lead of the final, which is the Emitter. Is this correct with what I am seeing on the schematic? Again a Big Thank You Xracerx13 for teaching me something that I did not know. RF Krazy [/QUOTE]

Top Bottom