You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Well, here is the update. I received new drivers and finals. I did test the transistors before I installed any of them. The driver was open and the final tested fine. I replaced the driver and....nothing. I went back to the beginning and checked for voltage at the center pin of both. On AM I have 4.77vdc and the same on SSB. I did check for voltage at the 3 pins of the regulator and I had 13.5 on 2 and 14.11 (power supply voltage) on one. Man this stuff is hard!!!!! I need to ask a question about a GE mobile but I'll start a new thread for that. Thanks as always!!!!

[QUOTE="Lkaskel, post: 660613, member: 50403"] Well, here is the update. I received new drivers and finals. I did test the transistors before I installed any of them. The driver was open and the final tested fine. I replaced the driver and....nothing. I went back to the beginning and checked for voltage at the center pin of both. On AM I have 4.77vdc and the same on SSB. I did check for voltage at the 3 pins of the regulator and I had 13.5 on 2 and 14.11 (power supply voltage) on one. Man this stuff is hard!!!!! I need to ask a question about a GE mobile but I'll start a new thread for that. Thanks as always!!!! [/QUOTE]

Top Bottom