You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Been gone, just got home.

I don't have a working 2547 anymore, so I wasn't looking to change that transformer, just curious about how one goes about doing it. Curiosity is all. I have been tempted to do some experimenting with receivers, and probably will soon, just not sure if that will be on an existing radio or if it will be the beginnings of a homebrew rig. I have a couple SMT low noise J310's and a few BF998 dual gate mosfets, both would probably make great receiver front ends. I originally wanted to make an entire radio out of altoid cans connected together with SMAs so each stage was shielded, maybe some day.

That single-balanced mixer does look like it needs one of these in its place
[URL unfurl="true"]https://www.mouser.com/datasheet/2/1030/ADE-1H_2b-1700018.pdf[/URL]

[QUOTE="brandon7861, post: 812030, member: 53724"] Been gone, just got home. I don't have a working 2547 anymore, so I wasn't looking to change that transformer, just curious about how one goes about doing it. Curiosity is all. I have been tempted to do some experimenting with receivers, and probably will soon, just not sure if that will be on an existing radio or if it will be the beginnings of a homebrew rig. I have a couple SMT low noise J310's and a few BF998 dual gate mosfets, both would probably make great receiver front ends. I originally wanted to make an entire radio out of altoid cans connected together with SMAs so each stage was shielded, maybe some day. That single-balanced mixer does look like it needs one of these in its place [URL unfurl="true"]https://www.mouser.com/datasheet/2/1030/ADE-1H_2b-1700018.pdf[/URL] [/QUOTE]

Top Bottom