Just recently purchased a different car, and I would to fund some of the maintenance and upgrades for it, so some of my CB stuff has to go! I would like to get 1 sum for it all as a package, but I'll part it out of I have to. Pics available on request if needed.
Bases:
Cobra 139XLR AM/SSB base - Cosmetically it's a 5, been around the block so to speak! LOL Functionally, it's about a 9, works real well, stable, TX/RX good. Has 27.415-27.805 for channels.
Royce 1-642 AM/SSB base - Cosmetically it's a 9.5, beautiful condition, no real blemishes to speak of. Functionally, it's also about a 9-9.5, works very well, excellent TX/RX. Has 27.425-27.595 for channels.
Uniden Washington AM/SSB base - Cosmetically, it's a 9. nice condition radio. Functionally, also about a 9. Works very well, good TX/RX. Has 27.455-27.725 for channels.
Cobra 135XLR AM/SSB base - Cosmetically, it's a 9.5, also beautiful condition, no real blemishes. Funtionally, I'd give it an 8, as SSB output is low, about 12-14W. AM output is good. I didn't want to mess with this radio much, as it's in great shape. Has 27.425-27.595 for channels. Comes with stock mic and the schematic.
Midland 78-976 AM/SSB base - Cosmetically, it's a 9-9.5 great shape. I've never had this one open inside since I've owned it, but it may have been tuned up a little. Functionally, it's a 9, works real well. Stock 40 channels. This is the PLL02A Cybernet chassis. Comes with priginal box, all manuals, hardware, mic, and power cord.
Mobiles:
Cobra 148GTL AM/SSB - Cosmetically, it's a 5... beatup and ugly. Functionally it's an 8.5-9, works real well, Has blue meter bulb and digital readout installed. 10 turn clarifier pot also installed. Has 26.815-28.045 for channels.
(2) Midland 79-892's AM/SSB - 1 is about a 6-7 cosmetically, beatup a bit, nothing super serious. Rewired 4 pin cobra by myself. Unlocked clarifier on the RF gain control. Functionally it works good, I give it an 8.5. Good TX/RX. Has 27.425-27.595 for channels.
The other one is original. Cosmetically it's about an 8, has some wear but good condition. This one has the original 5 pin mic on it, with the clarifier control on the mic! Functuionally, it works real well, I'd give it a 9. Stock 40 channels.
Cobra 138XLR AM/SSB - Cosmetically, I'd give it an 8.5, nice shape for an old D858 SSB chassis. Has a red meter bulb installed. Also as the Mosfet final istalled and works well. Functionally, I'd give it an 8.5-9. Slight clarifier drift, but not too bad. Has 27.455-27.805 for channels.
Cobra 29LTD/NW AM - Cosmetcally, not bad, about an 8 or so, has some wear but nice shape. Functioanlly, it's a 9, works real well TX/RX. Has a Mosfet final installed, and yes, the nightwatch DOES work. Stock 40 channels.
President HR-2600 AM/FM/SSB/CW Export - Cosmeticaly, someone painted the covers, and they look terrible, because of that, I give it a 6. I found a decent bottom cover for it, and I have that on. I swapped it over to a standard 3 pin plug-in in the back for the +12V. Functuionally, it works great, I'd give it a 9. USB clarifier position isn't totally lined up with LSB/AM/FM modes, but I never messed with it. Does 35W on SSB. Clear display with no blotting. This radio IS chipswitched. Comes with a nice sounding President mic. This mic does NOT have the up/down buttons. Covers 24.800-29.699 for channels.
I'll have more later I am sure when I get this stuff moved, or I think of more. However, work calls, and I need to get going. I would like to get $1000.00 for the entire package plus actual shipping costs. Would prefer not to separate anything, but if I don't get any hits on it as a package deal, I will. If you have any questions, PM me or send me an email at bander_moth@hotmail.com. Thanks!
~Cheers~
Bases:
Cobra 139XLR AM/SSB base - Cosmetically it's a 5, been around the block so to speak! LOL Functionally, it's about a 9, works real well, stable, TX/RX good. Has 27.415-27.805 for channels.
Royce 1-642 AM/SSB base - Cosmetically it's a 9.5, beautiful condition, no real blemishes to speak of. Functionally, it's also about a 9-9.5, works very well, excellent TX/RX. Has 27.425-27.595 for channels.
Uniden Washington AM/SSB base - Cosmetically, it's a 9. nice condition radio. Functionally, also about a 9. Works very well, good TX/RX. Has 27.455-27.725 for channels.
Cobra 135XLR AM/SSB base - Cosmetically, it's a 9.5, also beautiful condition, no real blemishes. Funtionally, I'd give it an 8, as SSB output is low, about 12-14W. AM output is good. I didn't want to mess with this radio much, as it's in great shape. Has 27.425-27.595 for channels. Comes with stock mic and the schematic.
Midland 78-976 AM/SSB base - Cosmetically, it's a 9-9.5 great shape. I've never had this one open inside since I've owned it, but it may have been tuned up a little. Functionally, it's a 9, works real well. Stock 40 channels. This is the PLL02A Cybernet chassis. Comes with priginal box, all manuals, hardware, mic, and power cord.
Mobiles:
Cobra 148GTL AM/SSB - Cosmetically, it's a 5... beatup and ugly. Functionally it's an 8.5-9, works real well, Has blue meter bulb and digital readout installed. 10 turn clarifier pot also installed. Has 26.815-28.045 for channels.
(2) Midland 79-892's AM/SSB - 1 is about a 6-7 cosmetically, beatup a bit, nothing super serious. Rewired 4 pin cobra by myself. Unlocked clarifier on the RF gain control. Functionally it works good, I give it an 8.5. Good TX/RX. Has 27.425-27.595 for channels.
The other one is original. Cosmetically it's about an 8, has some wear but good condition. This one has the original 5 pin mic on it, with the clarifier control on the mic! Functuionally, it works real well, I'd give it a 9. Stock 40 channels.
Cobra 138XLR AM/SSB - Cosmetically, I'd give it an 8.5, nice shape for an old D858 SSB chassis. Has a red meter bulb installed. Also as the Mosfet final istalled and works well. Functionally, I'd give it an 8.5-9. Slight clarifier drift, but not too bad. Has 27.455-27.805 for channels.
Cobra 29LTD/NW AM - Cosmetcally, not bad, about an 8 or so, has some wear but nice shape. Functioanlly, it's a 9, works real well TX/RX. Has a Mosfet final installed, and yes, the nightwatch DOES work. Stock 40 channels.
President HR-2600 AM/FM/SSB/CW Export - Cosmeticaly, someone painted the covers, and they look terrible, because of that, I give it a 6. I found a decent bottom cover for it, and I have that on. I swapped it over to a standard 3 pin plug-in in the back for the +12V. Functuionally, it works great, I'd give it a 9. USB clarifier position isn't totally lined up with LSB/AM/FM modes, but I never messed with it. Does 35W on SSB. Clear display with no blotting. This radio IS chipswitched. Comes with a nice sounding President mic. This mic does NOT have the up/down buttons. Covers 24.800-29.699 for channels.
I'll have more later I am sure when I get this stuff moved, or I think of more. However, work calls, and I need to get going. I would like to get $1000.00 for the entire package plus actual shipping costs. Would prefer not to separate anything, but if I don't get any hits on it as a package deal, I will. If you have any questions, PM me or send me an email at bander_moth@hotmail.com. Thanks!
~Cheers~
