You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

[ATTACH=full]46249[/ATTACH]

Here’s the way I ran two (2) 7’ Skipshooters with an aftermarket cophase harness on an ‘18 Cascadia Evo. Tilted to just barely clear 14’ on Pro Comm Mounts.

That antenna pair now on a Kenworth T680; height clearance at 13.75’ total. Identical company truck next to it with factory antennas. Note height difference. These get ABOVE the 53’ van. Slight tilt forward on aftermarket Pro Comm mounts.

[ATTACH=full]46253[/ATTACH]

Below, the way fourstringburn ran a single off an earlier model.

Height is Might.

[ATTACH=full]46250[/ATTACH]

The Big Dogs gotta have a long leash.

.

[QUOTE="Slowmover, post: 769797, member: 44265"] [ATTACH=full]46249[/ATTACH] Here’s the way I ran two (2) 7’ Skipshooters with an aftermarket cophase harness on an ‘18 Cascadia Evo. Tilted to just barely clear 14’ on Pro Comm Mounts. That antenna pair now on a Kenworth T680; height clearance at 13.75’ total. Identical company truck next to it with factory antennas. Note height difference. [I]These get ABOVE the 53’ van. [/I]Slight tilt forward on aftermarket Pro Comm mounts. [ATTACH=full]46253[/ATTACH] Below, the way [I]fourstringburn [/I]ran a single off an earlier model. [B][I]Height is Might. [/I][/B] [ATTACH=full]46250[/ATTACH] The Big Dogs gotta have a long leash. . [/QUOTE]

Top Bottom