• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Since two of the three radios didn't work; I have to question the antenna setup.  If it had been the other way around -that is if two of the three radios worked- then I would have said that it is the radio at fault here.  But in this case,  I have to wonder about the antenna.


First, the antenna is only fifteen feet off of the ground to the feed point.  That is really low; and I'm sure your receive must be suffering - as well as the transmit.  Next, the coax is new - that is a OK - provided there is some length to it.  I would get that $50 Starduster or the A99 and put it ~33 ft up - and be done with it.  Once you are on the band and operating with a decent antenna, you will enjoy your radio much more.


Something about your antenna is not right.  Just having a OK SWR is no guarantee that it is working correctly.  It only proves that the power is moving out of the radio; but this does not mean that it is being radiated effectively and efficiently! 


Sure, the Washington may have been peaked and may throw a couple of more watts; but any of these radios should be able to talk to someone up to ~12 miles away with relative ease.  With no strain - I might add.  Your station should be blaring at the interstate radio traffic - if it is a half of a mile away.  I have a interstate freeway 1/2 mile away from my base station as well, and I burn up the truckers needles on their radios - and I am a barefoot station ('no linears').  Time for a new antenna - imo.  So - I would have to say that an antenna with no issues may be in order for you to get your station up and flying...


Dos Centavos...