You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Removed everything from inside Tube deck, starting fresh. Added terminal strip and ceramic post as foundation for mounting components. Will duplicate Pride input circuit best I can. Have picture of pride Input board to aid in part selection. Have good selection of red & yellow toroid cores to use Turn count for starting point & Inductance meter to verify. Ordered two, 200uH Bobbin chokes as pictured on the Pride input board lower right corner. Only concern I have at this point is what affect an extra tube will have.

[QUOTE="Naysayer, post: 840883, member: 57429"] Removed [I]everything[/I] from inside Tube deck, starting fresh. Added terminal strip and ceramic post as foundation for mounting components. Will duplicate Pride input circuit best I can. Have picture of pride Input board to aid in part selection. Have good selection of red & yellow toroid cores to use Turn count for starting point & Inductance meter to verify. Ordered two, 200uH Bobbin chokes as pictured on the Pride input board lower right corner. Only concern I have at this point is what affect an extra tube will have. [/QUOTE]

Top Bottom