You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Stripped RF deck down to sockets. Rebuild looking better than my prior mess which worked great on a DL, lol. Antennas not so much. The 3 PSU's (plate, grid, screen) are in order so back to revising RF Input with an attempt to copy Pride's diagram for 10-11-20-40.

Received a better Inductance meter, LC100-A Ver 4.8. Using some quality fixed inductors I found the meter useless below 1.4uH. It's good for higher values and does provide a sense of what a few turns actually means in circuit. Back to counting Turns and 'designing for less' so whatever uH value I'm searching for will likely be more. That gives me a probable direction to follow (adding uH easier than removing).

Getting hot in NYC and it's not even July yet.
Will post more soon. neil

[QUOTE="Naysayer, post: 841139, member: 57429"] Stripped RF deck down to sockets. Rebuild looking better than my prior mess which worked great on a DL, lol. Antennas not so much. The 3 PSU's (plate, grid, screen) are in order so back to revising RF Input with an attempt to copy Pride's diagram for 10-11-20-40. Received a better Inductance meter, LC100-A Ver 4.8. Using some quality fixed inductors I found the meter useless below 1.4uH. It's good for higher values and does provide a sense of what a few turns actually means in circuit. Back to counting Turns and 'designing for less' so whatever uH value I'm searching for will [I]likely[/I] be more. That gives me a probable direction to follow (adding uH easier than removing). Getting hot in NYC and it's not even July yet. Will post more soon. neil [/QUOTE]

Top Bottom