You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Here you can see the safety latch that is spring-loaded, you are supplied with 100' of Kevlar laced string which attaches to the S-hook so you can deactivate the latch when you need to crank the tower down.

The next picture is a close-up of the roller system that allows the hazer to slide up and down the tower without the fear of it catch on a sectional bolt-head. This is an option but I would not want to trust the hazer sliding metal against metal and the chance it could get hung-up when fully extended.

Next we have the rotor shelf which is similar to a rotor plate that would fit inside of a Rohn 25G tower. Above this shelf is a similar plate that is drilled to accept a Yaseu Thrust bearing.

Here you can see the entire hazer and the rotor shelf and thrust bearing shelf. Since it is make of 100% aluminum it is light weight and easy to handle but it does take some time to assemble since there are 92 bolts to put in place and tighten up. A drill or impact drill makes things go a lot faster.

If you plan on ever buying one of these bookmark this link because the Glen martin instruction are nothing short of awful. My Hazer Building Experience

<blockquote data-quote="KG0MN" data-source="post: 372395" data-attributes="member: 12702"><img src="http://hi-techreviews.com/1/lift1.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />Here you can see the safety latch that is spring-loaded, you are supplied with 100&#039; of Kevlar laced string which attaches to the S-hook so you can deactivate the latch when you need to crank the tower down.<img src="http://hi-techreviews.com/1/lift2.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />The next picture is a close-up of the roller system that allows the hazer to slide up and down the tower without the fear of it catch on a sectional bolt-head.&nbsp; This is an option but I would not want to trust the hazer sliding metal against metal and the chance it could get hung-up when fully extended.<img src="http://hi-techreviews.com/1/lift3.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />Next we have the rotor shelf which is similar to a rotor plate that would fit inside of a Rohn 25G tower.&nbsp; Above this shelf is a similar plate that is drilled to accept a Yaseu Thrust bearing.<img src="http://hi-techreviews.com/1/lift4.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />Here you can see the entire hazer and the rotor shelf and thrust bearing shelf.&nbsp; Since it is make of 100% aluminum it is light weight and easy to handle but it does take some time to assemble since there are 92 bolts to put in place and tighten up.&nbsp; A drill or impact drill makes things go a lot faster.If you plan on ever buying one of these bookmark this link because the Glen martin instruction are nothing short of awful.&nbsp; <a href="http://livingindenali.net/Hazer.htm" target="_blank">My Hazer Building Experience</a></blockquote>

[QUOTE="KG0MN, post: 372395, member: 12702"] [IMG]http://hi-techreviews.com/1/lift1.jpg[/IMG] Here you can see the safety latch that is spring-loaded, you are supplied with 100' of Kevlar laced string which attaches to the S-hook so you can deactivate the latch when you need to crank the tower down. [IMG]http://hi-techreviews.com/1/lift2.jpg[/IMG] The next picture is a close-up of the roller system that allows the hazer to slide up and down the tower without the fear of it catch on a sectional bolt-head. This is an option but I would not want to trust the hazer sliding metal against metal and the chance it could get hung-up when fully extended. [IMG]http://hi-techreviews.com/1/lift3.jpg[/IMG] Next we have the rotor shelf which is similar to a rotor plate that would fit inside of a Rohn 25G tower. Above this shelf is a similar plate that is drilled to accept a Yaseu Thrust bearing. [IMG]http://hi-techreviews.com/1/lift4.jpg[/IMG] Here you can see the entire hazer and the rotor shelf and thrust bearing shelf. Since it is make of 100% aluminum it is light weight and easy to handle but it does take some time to assemble since there are 92 bolts to put in place and tighten up. A drill or impact drill makes things go a lot faster. If you plan on ever buying one of these bookmark this link because the Glen martin instruction are nothing short of awful. [url=http://livingindenali.net/Hazer.htm]My Hazer Building Experience[/url] [/QUOTE]

Top Bottom