You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I took a piece of birch plywood about for or five inches square and removed a good chunk of wood from the bottom side leaving the top veneer intact and filled the cavity with a couple layers of lead sheet.I made the cavity shaped so that it would not interfere with the mounting screws.I stained it with a nice wood stain and put rubber feet on the bottom. That sucker stays put.

[QUOTE="Captain Kilowatt, post: 150797, member: 39"] I took a piece of birch plywood about for or five inches square and removed a good chunk of wood from the bottom side leaving the top veneer intact and filled the cavity with a couple layers of lead sheet.I made the cavity shaped so that it would not interfere with the mounting screws.I stained it with a nice wood stain and put rubber feet on the bottom. That sucker stays put. [/QUOTE]

Top Bottom