You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hello I have a ft100d and the vfo shaft came out of the face. I disassembled the face and removed the vfo encoder/sending unit and disassembled the housing cover and the board inside the housing leaving a clear "splined" plastic refracting disc. I cleaned the old glue off the shaft hole, reinserted the shaft and epoxied it. I reinstalled everything exactly as it came apart with no problems. A sturdy fix BUT... The vfo worked- just backwards.. I need to figure why the vfo increases in frequency counter clockwise and decreases clockwise.
If anyone has some info on this I would appreciate the help, Thanks Eric.

[QUOTE="KE7GRO, post: 159466, member: 11216"] Hello I have a ft100d and the vfo shaft came out of the face. I disassembled the face and removed the vfo encoder/sending unit and disassembled the housing cover and the board inside the housing leaving a clear "splined" plastic refracting disc. I cleaned the old glue off the shaft hole, reinserted the shaft and epoxied it. I reinstalled everything exactly as it came apart with no problems. A sturdy fix BUT... The vfo worked- just backwards.. I need to figure why the vfo increases in frequency counter clockwise and decreases clockwise. If anyone has some info on this I would appreciate the help, Thanks Eric. [/QUOTE]

Top Bottom