You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

No as you have said I been down that road been there done that got the Tshirt now I double check before even soldering the first wire LMA!!

I just cant figure out why I get nothing no keyuo no up/down channel movement fricken crazy!! It would make sense if the wires were all backwards but they were correct!! I cut the plug off up high thinking maybe the cord was pinched broke and bad so we will se tomorrow.

I even use a large magnifying lighter lamp to see the pin numbers and after doing so many mics you just automatically know its reversed from the backside but I still check

<blockquote data-quote="TonyV225" data-source="post: 394410" data-attributes="member: 171">No as you have said I been down that road been there done that got the Tshirt now I double check before even soldering the first wire LMA<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f606.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":lol:" title="Laugh&nbsp; &nbsp; :lol:"&nbsp; data-smilie="19"data-shortname=":lol:" />!!&nbsp;I just cant figure out why I get nothing no keyuo no up/down channel movement fricken crazy!! It would make sense if the wires were all backwards but they were correct!! I cut the plug off up high thinking maybe the cord was pinched broke and bad so we will se tomorrow.&nbsp;I even use a large magnifying lighter lamp to see the pin numbers and after doing so many mics you just automatically know its reversed from the backside but I still check&nbsp; <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" /></blockquote>

[QUOTE="TonyV225, post: 394410, member: 171"] No as you have said I been down that road been there done that got the Tshirt now I double check before even soldering the first wire LMA:lol:!! I just cant figure out why I get nothing no keyuo no up/down channel movement fricken crazy!! It would make sense if the wires were all backwards but they were correct!! I cut the plug off up high thinking maybe the cord was pinched broke and bad so we will se tomorrow. I even use a large magnifying lighter lamp to see the pin numbers and after doing so many mics you just automatically know its reversed from the backside but I still check ;) [/QUOTE]

Top Bottom