You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hello Everyone,

I been searching the internet for help rewiring the Uniden BC906W to my Ranger 2990/2950 and to my Galaxy 2527. I know the mic wiring on the 2990,2950 and the 2527 are all the same. I am not sure where to get the voltage for Pin 6 ( 7.8VDC ) or do I need to get an power adapter to supply the voltage needed and don't have to open each radio and find 7.8 volts and run a wire to pin 6 ? Or would it be best to find 7.8VDC in each radio and run it to pin 6 ? I am going to get 2 more microphones for my other radios but didn't want to until I have things figured out.

Thanks in advance, please explain your help best as possible. I know somethings about cb's and electronics I am not a expert yet.

[QUOTE="BigBrother, post: 606105, member: 49437"] Hello Everyone, I been searching the internet for help rewiring the Uniden BC906W to my Ranger 2990/2950 and to my Galaxy 2527. I know the mic wiring on the 2990,2950 and the 2527 are all the same. I am not sure where to get the voltage for Pin 6 ( 7.8VDC ) or do I need to get an power adapter to supply the voltage needed and don't have to open each radio and find 7.8 volts and run a wire to pin 6 ? Or would it be best to find 7.8VDC in each radio and run it to pin 6 ? I am going to get 2 more microphones for my other radios but didn't want to until I have things figured out. Thanks in advance, please explain your help best as possible. I know somethings about cb's and electronics I am not a expert yet. [/QUOTE]

Top Bottom