You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Well, besides its general description - this harness combines the use of both gammas on the vertical and horizontal beam elements. Never used one; my beam is a Yagi with only one gamma - of course. But what this harness is supposed to accomplish is causing both the vertical and horizontal elements to radiate at the same time. Bet it is a bear to set up! But the net result is a circular radiating pattern if phased correctly.

Perhaps you can put this one into EZNEC and see how that radiates.
Perhaps using a PDL-II as the basis for that model?

[QUOTE="Robb, post: 369329, member: 8446"] Well, besides its general description - this harness combines the use of both gammas on the vertical and horizontal beam elements. Never used one; my beam is a Yagi with only one gamma - of course. But what this harness is supposed to accomplish is causing both the vertical and horizontal elements to radiate at the same time. Bet it is a bear to set up! But the net result is a circular radiating pattern if phased correctly. Perhaps you can put this one into EZNEC and see how that radiates. Perhaps using a PDL-II as the basis for that model? [/QUOTE]

Top Bottom