You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

From Maco:

Draw your own conclusions . . .

EDIT:

IF the RG-11 (unknown velocity factor) coax 1/2 wave lenth long is on the 'LAG' side or horizontal side; then the CP would spin in the direction of the lag side? Not quite sure why that the barrel connector is needed. Would think that the velocity factor of that coax at a given freq would allow for the 90 degree out of phase? Impedance should be 62.5 ohms.

[QUOTE="Robb, post: 369479, member: 8446"] From Maco: Draw your own conclusions . . . EDIT: IF the RG-11 (unknown velocity factor) coax 1/2 wave lenth long is on the 'LAG' side or horizontal side; then the CP would spin in the direction of the lag side? Not quite sure why that the barrel connector is needed. Would think that the velocity factor of that coax at a given freq would allow for the 90 degree out of phase? Impedance should be 62.5 ohms. [/QUOTE]

Top Bottom