You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Don't think you can use the CC-1-Y unless you hack it for the mic connector. Your going to have to have a 4 pin xlr from the mic to a 3 pin xlr or a phono plug to connect the mic to the mixer. A cheap audio cable works fine for that, just add a 4 pin XLR to the mic end. Then you need a cable from the mixer out to the input of a device similar to the W2IHY iBox to convert the line audio to mic level audio and a cable from the output of the interface to the Galaxy. For the iBox that would be a 5 pin din to a 4 pin mic plug.

If I were you I'd order the iBox Kit and a generic interface cable.

Look at the picture I posted on the 2nd page of this thread. It shows exactly what you need and the cables involved. The only thing diferent is the 3 pin xlr on the studio mic vs the 4 pin you have to have for the Heil mic.

[QUOTE="RatsoW8, post: 343297, member: 11356"] Don't think you can use the CC-1-Y unless you hack it for the mic connector. Your going to have to have a 4 pin xlr from the mic to a 3 pin xlr or a phono plug to connect the mic to the mixer. A cheap audio cable works fine for that, just add a 4 pin XLR to the mic end. Then you need a cable from the mixer out to the input of a device similar to the W2IHY iBox to convert the line audio to mic level audio and a cable from the output of the interface to the Galaxy. For the iBox that would be a 5 pin din to a 4 pin mic plug. If I were you I'd order the iBox Kit and a generic interface cable. Look at the picture I posted on the 2nd page of this thread. It shows exactly what you need and the cables involved. The only thing diferent is the 3 pin xlr on the studio mic vs the 4 pin you have to have for the Heil mic. [/QUOTE]

Top Bottom