You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

As per instructions for the dimensions of the gamma rod, I did that by the book. Then I tested it with the analyzer. It was waaaaay off. I just used the analyzer and adjusted it to the best reading possible - which turned out to be not even close to the instruction sheet dimensions for the gamma rod AND the clip between the gamma rod and the driven element.

[QUOTE="Robb, post: 433180, member: 8446"] As per instructions for the dimensions of the gamma rod, I did that by the book. Then I tested it with the analyzer. It was waaaaay off. I just used the analyzer and adjusted it to the best reading possible - which turned out to be not even close to the instruction sheet dimensions for the gamma rod AND the clip between the gamma rod and the driven element. [/QUOTE]

Top Bottom