You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Well; two of the legs -IIRC- are the same. But you are right. After all, the GasFet is a FET. Not a bipolar transistor like the 2999. They are not direct replacements. A FET requirements would need to be met first, and then it would work. Some circuit changes would become necessary, IIRC.

Don't think that impedance is the issue, because the FET's have a very wide range.
But the voltage requirements would be different.

[QUOTE="Robb, post: 447493, member: 8446"] Well; two of the legs -IIRC- are the same. But you are right. After all, the GasFet is a FET. Not a bipolar transistor like the 2999. They are not direct replacements. A FET requirements would need to be met first, and then it would work. Some circuit changes would become necessary, IIRC. Don't think that impedance is the issue, because the FET's have a very wide range. But the voltage requirements would be different. [/QUOTE]

Top Bottom