Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Retevis Holidays giveaway winner has been selected! Check Here to see who won!

HR2600 TX problem

  • Thread starter Thread starter ajw2685
  • Start date Start date
A

ajw2685

Guest
I just got my HR2600 back from Doc's. I hooked everything up and I have a carrier on my meter buy 0 modulation/voice. I can register a carrier but my voice goes no where and I have 0 swing. I think I have a bad mic but have no way of testing it. Has anyone ever had this problem on a radio? I haven't called Doc yet because I think it is my microphone and not his work. I am looking for a 5 pin to 4 pin that will work on this radio to test it with a different mic.

Any suggestions?
 

Problem solved! It was indeed a bad mic. I unsoldered the president mic from the 5 pin connector and soldered a cobra 4 pin back on and voila I had modulation. 8)
 

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom