You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks for the info Nomad. (LC's diagram attached)

I do not use AM mode but my thinking was that "zero bias" would be beneficial to the tubes on SSB between words to cut off the tubes. I do understand the need to add "input tune" when performing this mod and am trying to figure out how to physically do this as this chassis is very tight.
Knowing my negative voltages are limited (either 6vac or 12vac) before rectification, I guess my question is, as in most other things, If a little is good, is more better?

Again, thanks for the education!

73's
David

[QUOTE="Dmans, post: 623812, member: 49046"] Thanks for the info Nomad. (LC's diagram attached) I do not use AM mode but my thinking was that "zero bias" would be beneficial to the tubes on SSB between words to cut off the tubes. I do understand the need to add "input tune" when performing this mod and am trying to figure out how to physically do this as this chassis is very tight. Knowing my negative voltages are limited (either 6vac or 12vac) before rectification, I guess my question is, as in most other things, If a little is good, is more better? Again, thanks for the education! 73's David [/QUOTE]

Top Bottom