You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Then it sounds as if your 29 is right on the money as far as carrier to peak ration is concerned but what will the radio do from 1 to 1.5 watts carrier to peak after you have it detuned so to speak?

If it continues to peak at 32 watts then you've gotten away from your 4 to 1 ratio and it should sound awful with or with out the 1 pill section turned on or at least show to be awful on the same scoped you mentioned earlier.

A more realistic way of measuring is to measure carrier to peak average power so at a carrier of 1 watt the radio should peak at 2.5 watts average power which is 1 and 1/2 to 1 of the resting carrier which would insure a modulation level of 100% which would not endanger the final output stage of being over driven and assure a nice sounding signal.

[QUOTE="mackmobile43, post: 121748, member: 6232"] Then it sounds as if your 29 is right on the money as far as carrier to peak ration is concerned but what will the radio do from 1 to 1.5 watts carrier to peak after you have it detuned so to speak? If it continues to peak at 32 watts then you've gotten away from your 4 to 1 ratio and it should sound awful with or with out the 1 pill section turned on or at least show to be awful on the same scoped you mentioned earlier. A more realistic way of measuring is to measure carrier to peak average power so at a carrier of 1 watt the radio should peak at 2.5 watts average power which is 1 and 1/2 to 1 of the resting carrier which would insure a modulation level of 100% which would not endanger the final output stage of being over driven and assure a nice sounding signal. [/QUOTE]

Top Bottom