You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

when i did my 148 i ran 3 wires from vr10 to swr pot then to get the swing when the radio is dead keying 1 watt a member from here shockwave told me to lift the unbanded leg from D54 then run a jumper wire from that empty spot to pin 9 of audio chip all limiters are still intact and working good loud audio reports

[QUOTE="1iwilly, post: 812351, member: 8378"] when i did my 148 i ran 3 wires from vr10 to swr pot then to get the swing when the radio is dead keying 1 watt a member from here shockwave told me to lift the unbanded leg from D54 then run a jumper wire from that empty spot to pin 9 of audio chip all limiters are still intact and working good loud audio reports [/QUOTE]

Top Bottom