You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I use a Kenwood B-2000 on HF and another one on VHF-UHF 6 meters.
I wanted to use one for satellite work with SatPC32 and using
TRX-manager to controll the radio. One problem Ive run into is
both programs are trying to use the same port.
Is there a way to run both SatPC32 and TRX-manager at
the same time? Anyone do that?

I do have the remote head which I could use to tune the freq on the radio
but would prefer to use TRX-manager to control the radio.

I might go after the IC-9100 and replace the B-2000 rigs all together.

Maybe a FT-736R just for satellite work would be ok too. Can you still
get those repaired?

[QUOTE="videorov, post: 181050, member: 7775"] I use a Kenwood B-2000 on HF and another one on VHF-UHF 6 meters. I wanted to use one for satellite work with SatPC32 and using TRX-manager to controll the radio. One problem Ive run into is both programs are trying to use the same port. Is there a way to run both SatPC32 and TRX-manager at the same time? Anyone do that? I do have the remote head which I could use to tune the freq on the radio but would prefer to use TRX-manager to control the radio. I might go after the IC-9100 and replace the B-2000 rigs all together. Maybe a FT-736R just for satellite work would be ok too. Can you still get those repaired? [/QUOTE]

Top Bottom