You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

pick up a 148 gtl side mike made in Taiwan on trade it seems someone tried to do wide banding on ic-5 r190 suppose to be 100ohms is like a 47k
on top of the solder side of the chip looks like a 100ohm resistor i put the100ohm back in r190 like the schematic shows and remove the one on the solder side but know it has low power maybe a cap change also ????

[QUOTE="1iwilly, post: 795254, member: 8378"] pick up a 148 gtl side mike made in Taiwan on trade it seems someone tried to do wide banding on ic-5 r190 suppose to be 100ohms is like a 47k on top of the solder side of the chip looks like a 100ohm resistor i put the100ohm back in r190 like the schematic shows and remove the one on the solder side but know it has low power maybe a cap change also ???? [/QUOTE]

Top Bottom