Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

ICOM IC-2730 program cable built home made...

IW2BSF

IW2BSF

New Member
Jan 26, 2016
2
0
1
Italy
rodolfo-parisio.jimdo.com
the original icom program by ICOM is too expencive ..... 40 dollars

i see that is possible to use a chip usb-ttl cost 3-4 dollars to built home-made

the cable .


how have the schematic diagram to built this ? have you infos about this cable home-made ?

How use the "original" sw for program memory in the new icom ic-2730 ?


best 73 de Rudy - IW2BSF
 


Write your reply...
dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    6387011492105337058974280.jpg
  • @ Geoexplorer69:
    Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
  • @ Geoexplorer69:
    Is 30 ohms worth worrying about in a 100’ run of rg8u ?
  • @ BJ radionut:
  • @ BJ radionut:


      You do not have the permission to use the chat.


      Top Bottom