-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I'm Looking to buy a driver at least 100 Watt out PEP, for a 6 Pill.
- Thread starter mitch169
- Start date
Might matter how much drive wattage you wish to use with this amplifier. A radio that's big enough will sound better driving the big box directly. Even a small one will, but might disappoint with the wattmeter reading.
I think the gap you seek to fill between the radio and amplifier might be too small to justify adding another amplifier.
Unless the radio is a stock 40 year old Cobra 2000GTL busting a gut to swing 13 Watt peaks. That would no doubt call for a driver.
73
I think the gap you seek to fill between the radio and amplifier might be too small to justify adding another amplifier.
Unless the radio is a stock 40 year old Cobra 2000GTL busting a gut to swing 13 Watt peaks. That would no doubt call for a driver.
73
Yes, the main radio is a Flex 50000a putting out 65 watts.
Then I would need a driver once I finish the restoration of the Browning Golden Eagle Mark III, which puts out about 10 watts. Then I would need one. I don't want to drive the box hard. The previous owner didn't, I asked this question thinking the box would need 100 watts to drive it.
Then I would need a driver once I finish the restoration of the Browning Golden Eagle Mark III, which puts out about 10 watts. Then I would need one. I don't want to drive the box hard. The previous owner didn't, I asked this question thinking the box would need 100 watts to drive it.
Carlbuilt C60 mobile with biasing $220 plus shipping. Does have variable. Will need a small power supply. The C80 with biasing for $235 would work too with the six.
Can't remember seeing a 6-transistor linear with proper bias for clean sideband. Just accustomed to that design setup as being a AM thing.
The "powers of 2" style, with two, four, eight or sixteen is more what I'm used to seeing in sidebandland.
Who made this one?
73
The "powers of 2" style, with two, four, eight or sixteen is more what I'm used to seeing in sidebandland.
Who made this one?
73
Shadetree Mechanic
Delaware Base Station 808
The KL 203 and 203p will give you an easy 100w. Set the radio carrier to 1.5 watts will give you about 25w carrier out. I have bought from this place several times before, never had a problem. They have a distribution warehouse in California.
88radio.com
25-30 Mhz
88radio.com
Go ahead and buy two of them while you're at it, if you're shopping @ 88radio. They have a special - if you buy two it's $40.00 off. I did this the last time I ordered.
Shadetree Mechanic
Delaware Base Station 808
I have a bunch of them floating around just in case I need a little extra.
I went with Hammer Jockey. Excellent Built 2 MRF454 with SSB Bias and Veraiable.
I get 160 out
I get 160 out
Variable, let's try this with the proper spelling. Could not figure out how to edit
I like this transistor because it's one if the last, still manufactured to OEM Motorola specs, even though it's made by Ma-Com today.
I have wondered for a while if Motorola sold rights to make the MRF products to MA/Com as part of the Iridium bankruptcy reorganization/fundraising. At least MA/Com produces real copies with a decent quality record.
73
73