You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

.

DB, what's the name of your modeling program?

...and what else is cool is I haven't read about any of this anywhere else on the web, DB you just may be the first to have figured out the Imax advantage - after so many decades on the market!

On mine, it's field tested to be a Pene-beater at that height and in the direction of the Ustream receiver that radial was the steepest, only 16' from the mast, 8' up from the ground, 33' below the antenna base, so I'm calculating about a 65°- 70° downward angle diagonal radial slope.

Perhaps you might also try downward-sloping 1/2 wave radials in your modeling.

[QUOTE="Needle Bender, post: 570912, member: 13339"] . DB, what's the name of your modeling program? ...and what else is cool is I haven't read about any of this anywhere else on the web, DB you just may be the first to have figured out the Imax advantage - after so many decades on the market! On mine, it's field tested to be a Pene-beater at that height and in the direction of the Ustream receiver that radial was the steepest, only 16' from the mast, 8' up from the ground, 33' below the antenna base, so I'm calculating about a 65°- 70° downward angle diagonal radial slope. Perhaps you might also try downward-sloping [B]1/2 wave[/B] radials in your modeling. [/QUOTE]

Top Bottom